View groups and posts below.
This post is from a suggested group
Please, I need the link for the BSP , image and flasher for Boxer- 8221AI, can any moderator provide me it? The manual says to download the image but I couldn't find the resource on the product page.
This post is from a suggested group
Hello. Is Jetpack version 6 available for BOXER-8653AI (Orin NX)?
Best regards
Hi Sir,
Sorry, I cannot provide a link to the download on this forum, so please contact the window where you purchased it. I will provide you with a download link via email.
Best Regards,
Neptune Liu
This post is from a suggested group
您好， 1. 這組AI camera 可以同時做幾組people monitoring? 或是在哪個文件可以找到類似的說明?
Ans: 這組套件可以支援一組camera輸入進行物件辨識，相關連結可參考研揚官網 https://www.aaeon.com/tw/p/ai-modules-m2ai-2242-520 ，下載區中的Manual及SDK
2. 是否可以跑在Andriod OS 系統主機上?
Ans: 本套件相容於window 10, 11 與 Ubuntu 18.04, 20.04等平台，目前套件之SDK尚未支援Android
關於這次您提到的問題，如果還有其他的疑問，您也可以寫信至下方信箱。我會再轉給我們的同仁，讓他為您解答。 ashley1liu@aaeon.com Ashley
This post is from a suggested group
Hi everyone,
I currently need to write some code for the Sensor Processing Engine (SPE) on Jetson Orin NX from Boxer-8653AI. I just want to know if I could use the default flash.sh from L4T package or if I need to use flashboxer script provided by AAEON, or even another tool that you guys provide.
Kind regards
Hi Sir,
Please refer to the below link:
https://docs.nvidia.com/jetson/archives/r35.3.1/DeveloperGuide/index.html
Best Regards,
Neptune Liu
This post is from a suggested group
Please, I need the link for the BSP , image and flasher for BOXER-8653AI, can any moderator provide me it? The manual says to download the image but I couldn't find the resource on the product page.
This post is from a suggested group
Where can I download the OS image for BOXER-8120AI?
its link： https://www.aaeon.com/tw/p/fanless-embedded-computers-boxer-8120ai
you can send it to my email： tjcloudwlaker@gmail.com
Please send me the images of sd card, emmc and pcie versions if you have any.
Good day！😉
Hi Sir,
I am sorry, this is customize products, please contact with your contact sales for get the image.
Best Regards,
Neptune Liu
This post is from a suggested group
Hi,
I'm using BOXER8221-AI-B3-1111, and I couldn't enter the "Recovery mode".
I read the manual and it says following. I tried many times of this but I can not enter the mode at all.
I have got the OS image from a distoributor and ectract it on the host PC. Then I connect USB cable the PC to BOXER flush usb port.
Case A: the same as the manual
BOXSER Power plug is off. Then connect the power plug, PWR LED on, then push the recovery button 2 second.
Hi 石井 孝佳 san,
Due to the 8221 is AT mode, so it will be power on immediately when the power input.
Therefore, to enter recovery mode, you must press and hold the Recovery button (Red Circle) for 5~10 seconds before the power is turned on and then release it.
After that, you can use "lsusb" to check if there is NVIDIA in the HOST PC, if there is, it means it has entered the Recovery mode.
Note, to enter Recovery mode, you must use Mirco USB cable to connect "OS FLASH" (Yellow) to HOST PC.
Best Regards,
Neptune Liu
This post is from a suggested group
The 8658AI I have came pre-installed with Jetpack 6 (L4T 36.3.0) and includes the AAEON BOXER BSP.
The manual mentions an image I can flash, as well as flashing software (flashbox).
I would like to flash my unit with Jetpack 5.1, including the BSP. Is this possible?
I also created a support ticket for this yesterday.
Thanks!
Hi Caleb,
Yes, you can downgrade the Jetpack version, but according to NVIDIA, if you downgrade to Jetpack 5.1.x, the L4T version won't be able to retain 36.3.0 because the L4T version is bound to the Jetpack version!
Additionally, if you want to get the images of Jetpack 5.1.x, please contact your salesperson and I will provide the download link to you via the E-Mail.
Best Regards,
Neptune Liu
This post is from a suggested group
I want to reset BOXSER8221AI to factory settings. Let me know how sould I do?
Hi 石井 孝佳 san,
First of all, thank you very much for purchasing AAEON products.
May I know where did you buy BOXSER8221AI-B3-1111?
Since this forum cannot provide image download links, please contact the salesperson from whom you purchased.
We will email you an image download link.
Best Regards,
Neptune Liu
We’ve received your email, and our team has already sent you the requested information via email.
Please let us know if you need any further assistance!