Hi everyone!
In BOXER-8250AI there are two connectors that are not specified on datasheet
We need to use a GPIO to generate a digital signal to create a watchdog to keep the system running at any cost.
We already have a external control board responsible to power on, power off and listen the watchdog signal.
Does anyone know what is the function of connectors CN23 and CN21 on base board?
Hello,
is there any way to remotely update/flash image? I tried OTA tools directly from Nvidia with their images, but it did not work.
Thank you
Dear Aaeon,
On BOXER-8250AI Jetpack 5.0.x or Jetson Linux 34.X/35.X under kernel 5.10.104-tegra using igb driver the ping can go from 50-1000ms. However, on Jetpack 4.6.2 Jetson Linux 32.7/32.6 Linux kernel 4.9.253-tegra, we can get reliable ~0.5 ms ping.
The problem is similar to https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=939200
I know Jetpack 5.0.x is not supported. But I report this issue to get some feedback on the future direction. Do we patch the kernel or there will be a hardware revision in the future (according to our testing Jetpack 5.0.x work fine in BOXER-8253AI-A1-1011 using igb version: 5.10.104-tegra)?
On Jetpack 5.0.x
Hi Sir,
AAEON has not yet produced images for jetpack 5.0. Therefore, we are unable to respond to this question at this time.
But thank you very much for providing us with this information!
We will pay special attention to this issue in the future.
Best Regards,
Neptune Liu
Hi Sandro,
CN21 is for RD debug use only.
CN23 is a GPIO pin, but our 8250 does not have this function in the specification, so we do not have the corresponding cable and sample code available.
Best Regards,
Neptune Liu