Dear Aaeon Team. Please help me on this urgent topic, since the documentation seems to be not very accurate and we are currently developing a project with many devices.
Because the downloadlink mentioned in the BOXER-8221AI Manual 5th Ed.pdf (aaeon.com.tw) is not working, I have downloaded the image from here:
https://newdata.aaeon.com.tw/DOWNLOAD/image/BOXER-8221AI/ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.7.tar.gz
I followed the instructions for "Flash to Sytem" on page 32 and following.
After executing "$ tar -zxvf ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.5.tar.gz" in the console, "$ tar -zxvf ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.5.tar.gz" was created.
The AAEON Boxer was successfully brought to Recovery mode.
But then I am stuck on page 33 of the manual.
"1. Open terminal on Ubuntu host PC, then access the bootloader folder you extracted in the previous section.
2. Enter the following command in terminal to flash the image:
"$ sudo ./flashall.sh"
The ./flashall.sh script does not exist. As mentioned, I can only see the .img file after extracting.
Is it the wrong download link or are there missing some steps?
Thanks for your answers in advance.
@Neptune Liu Sorry for asking again, but I have the following issue. I have flashed the standard Nvidia Ubuntu image with the Nvidia sdk to the BOXER-8221AI-B1-1111, because I had no ACLinux image at that time. Now it seems that the BOXER-8221AI-B1-1111 does not go to the recovery mode anymore, even when following the instructions. Any ideas how I can solve that? "lsusb | grep0955:7f21" on Host PC gives the following output: "grep0955:7f21: command not found" "sudo ./flashboxer.sh" on Host PC gives the following output: "No devices to flash" thanks for your support