BOXSER8221AI factory settings
I want to reset BOXSER8221AI to factory settings. Let me know how sould I do?
55 Views
top of page
NVIDIA Platforms
Public·15 members
WiFi does not find network on BOXER-8640AI.
Added the following wifi module to BOXER-8640AI.
・Jetpack: R35.1.0
・wifi module: AX210NGW
・wifi driver: iwlwifi-ty-a0-gf-a0-59.ucode
Wifi settings have been added to the settings screen, but no network is found. I can find the network on my laptop, so I don't think there will be any problems with the network.
When I checked with the `sudo dmesg | grep iwlwifi` command, the following error seems to have occurred.
45 Views
Neptune Liu
Dec 07, 2023
Hi Sir,
Based on a query on Google, the Intel AX210 seems to have a lot of problems (Firmware) in uBuntu 20.04.
And also, this WiFi module not in our AVL list.
So, you can ask Intel for get solution.
Our test:
9741364A00 - Wireless LAN Kit M.2 2230 802.11ac/a/b/g/n + BT5.0,2T2R,with 2 sets of cable & antenna (Enli,QCNFA364A)
9651882200 - M.2 2230 E key Wireless Kit.802.11 ac/a/b/g/n + BT 5.0.2T2R,Enli RTL-8822CE.w/2 sets of cable and antenna
Best Regards,
Neptune Liu
JetPack for 8640
I have aaeon 8640. I updated Jetpack using apt update. Added user etc , after restart, system not booting. I want to install OS again. Manuel writes "Download Internal.tar.gz” . I cannot find it. Where is the link for it? Thank you.
117 Views
Neptune Liu
Jun 02, 2023
Hi Diren,
Thank you for your E-Mail, I already sent the image link to you, please check your mail box.
Thank you.
Best Regards,
Neptune Liu
BOXER-8652AI: Flashing: RootFS image, dtb files?
I recently received an AAEON boxer-1852AI (Jetson Orin 16GB system) that I am designing into my embedded platform. Looks like this platform uses NVMe storage only (no emmc partition like Jetson AGX Xavier systems I've used in the past), and the out-of-box setup has 14 partitions on the NVMe drive, with the first partition being a large root filesystem partition.
For my system, I plan to re-partition the NVMe so that I can split the large root APP partition into several partitions used for specific purposes (root, video, images, logs, read-onliy system config, etc). With this in mind, I'm going to be needing to create and flash my own root filesystem image onto this device. However, I do not see any documentation / manual for 8652AI at at https://www.aaeon.com/en/p/ai-edge-solutions-boxer-8652ai . Typically, such a manual talks about the details of how to flash the vendor's device; e.g. showing where to download the…
121 Views
Neptune Liu
May 30, 2023
Hi Steve,
The link is flash SOP for our AAEON's image only for your reference.
FlashGuide_Boot_from_NVME_FlashGuide.pdf
And since 8652 is still unreleased, so currently the user manual is still not ready. and the one you have should be the sample version.
If you want AAEON's image and DTB files, please contact your sales window.
In addition, due to the Orin NX no eMMC, it can not do the boot from eMMC version image.
Best Regards,
Neptune Liu
bottom of page
Hi 石井 孝佳 san,
First of all, thank you very much for purchasing AAEON products.
May I know where did you buy BOXSER8221AI-B3-1111?
Since this forum cannot provide image download links, please contact the salesperson from whom you purchased.
We will email you an image download link.
Best Regards,
Neptune Liu