Dear Aaeon Team. Please help me on this urgent topic, since the documentation seems to be not very accurate and we are currently developing a project with many devices.
Because the downloadlink mentioned in the BOXER-8221AI Manual 5th Ed.pdf (aaeon.com.tw) is not working, I have downloaded the image from here:
https://newdata.aaeon.com.tw/DOWNLOAD/image/BOXER-8221AI/ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.7.tar.gz
I followed the instructions for "Flash to Sytem" on page 32 and following.
After executing "$ tar -zxvf ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.5.tar.gz" in the console, "$ tar -zxvf ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.5.tar.gz" was created.
The AAEON Boxer was successfully brought to Recovery mode.
But then I am stuck on page 33 of the manual.
"1. Open terminal on Ubuntu host PC, then access the bootloader folder you extracted in the previous section.
2. Enter the following command in terminal to flash the image:
"$ sudo ./flashall.sh"
The ./flashall.sh script does not exist. As mentioned, I can only see the .img file after extracting.
Is it the wrong download link or are there missing some steps?
Thanks for your answers in advance.
@Neptune Liu Sorry for asking again, but I have the following issue. I have flashed the standard Nvidia Ubuntu image with the Nvidia sdk to the BOXER-8221AI-B1-1111, because I had no ACLinux image at that time. Now it seems that the BOXER-8221AI-B1-1111 does not go to the recovery mode anymore, even when following the instructions. Any ideas how I can solve that? "lsusb | grep0955:7f21" on Host PC gives the following output: "grep0955:7f21: command not found" "sudo ./flashboxer.sh" on Host PC gives the following output: "No devices to flash" thanks for your support
Dear @Neptune Liu, I received the correct image from my key account manager. Thanks for the good support and fast answers.
Hi Simon,
So, to solve your current problem, what kind of image do you need?
4.6.2 boot from eMMC or 4.6.2 boot from Micro SD?
Please let me know and I will provide you with the image you need later.
Thank you for your support of AAEON products.
Hi Sir,
This image - ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.5.tar.gz (Jetpack 4.3), is boot from micro SD and only for BOXER-8221AI-KIT use.
So when you unzip the file, you will get the ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.5.sd.img
ACLinux_4.9_ACLNX49D.NV03.BOXER-8221AI.7 -> this is Jetpack 4.4
But anyway, you are currently purchasing the latest version of our system (BOXER-8221), therefore, you have the option to use Jetpack 4.6.2.
If you want to use Jetpack 4.6.2, you can select the below SKU:
Boot from eMMC
Boot from Micro SD
Best Regards,